- Ciecieląg, K., Zaleski K., Kecik K.
Effect of milling parameters on surface defect formation in polymer
composites. Materials Science Materials Science, Vol. 57, No. 6, 2022,
http://doi.10.1007/s11003-022-00622-w (MNiSW=40, IF=0.675).
- Mitura A., Kecik K.
Experimental research of the influence of a coil shape on energy
recovery. Book of Abstracts, 29th Symposium on Experimental Mechanica,
s. 33, 2022.
- Mitura A., Kecik K.
Research of electromechanical coupling in a system with two levitating
magnets. Book of Abstracts, 29th Symposium on Experimental Mechanica,
s. 34, 2022.
- Ślusarska
G., Stężycka E., Kecik K. Odzyskiwanie energii elektrycznej
z plecaka turystycznego. Automatyka przemysłowa i inżynieria w naukach
technicznych – wybrane zagadnienia, Redakcja: Kozłowska J.,
Chodźko E. Wydawnictwo Naukowe TYGIEL, 156-164. ISBN
978-83-67104-59-3.
- Kecik K. Modelling
of Electromechanical Coupling Effects in Electromagnetic Energy
Harvester, 1-8. Recent Trends in Wave Mechanics and Vibrations:
Proceedings of WMVC 2022 1st ed. 2023. Edited by T.Silva, Z.
Dimitrovova, R. Goncalves, P. Biswas, ISBN-10: 3031157575, (MNiSW=20).
- Kecik, K. Smagala, A. Lyubitska, K. Ball Bearing Fault Diagnosis Using Recurrence Analysis. Materials 2022, 15, 5940.
https://doi.org/10.3390/ma15175940 (MNiSW=140. IF= 3.748).
- Mitura A., Kecik K.
Modeling and energy recovery from a system with two pseudo-levitating
magnets. Bulletin of the Polish Academy of Sciences: Technical
Sciences, 2022, doi: 10.24425/bpasts.2022.141721, (MNiSW=100. IF= 1.515).
- Serwin K., Kecik K.
Analiza układu magnes -cewka z wykorzystaniem srodowiska
Comsol-Multiphysics. Badania naukowe w ujęciu dyscyplinarnym. M.
Drewniak, M. Ejdys, A. Ociepa-Kubicka. Wydawnictwo Naukowe Intellect,
2022. ISBN:978-83-67100-01-4. (MNISW=20,).
- Kecik K.,
Serwin K. Energy harvesting and vibration control using
adaptive suspension of a pendulm tuned mass damper.7th European
Conference on Structural Control Book of Abstracts and Selected Papers.
Editors: Jan Holnicki-Szulc, David Wagg and Łukasz Jankowski
. Co-editors: Bartłomiej Błachowski and Piotr Tauzowski, Institute of
Fundamental Technological Research, Polish Academy of Sciences,
Warszawa 2022.
- Kecik, K. Modification of Electromechanical Coupling in Electromagnetic Harvester. Energies 2022, 15, 4007.
https://doi.org/10.3390/en15114007 ( MNISW=140, IF=3.004).
- Kecik, K. Nonlinear Dynamics
and Energy Recovery of a Vibration Absorber/Harvester System with an
Adaptive Suspension , Journal of Vibration Engineering &
Technologies, 2022, https://doi.org/10.1007/s42417-022-00536-6, ( MNISW=40, IF=1.889).
- Slusarska G., Stęzycka E., Kęcik K. XIV
Interdyscyplinarna Konferencja Naukowa TYGIEL 2022
„Interdyscyplinarność kluczem do rozwoju” Abstrakty.Redakcja: P.
Pomajda, M. Maciąg, K. Maciąg, s. 184-85. ISBN 978-83-67194-30-3
- Kecik K., Mitura A., Effect of
variable friction on electromagnetic harvester dynamics. The European
Physical Journal Special Topics,10.1140/epjs/s11734-022-00493-x.
- Slusarska G., Stęzycka E., Kęcik K.XIV
Interdyscyplinarna Konferencja Naukowa TYGIEL 2022
„Interdyscyplinarność kluczem do rozwoju”
Abstrakty.Redakcja: P. Pomajda, M. Maciąg, K. Maciąg, s.
184-85. ISBN 978-83-67194-30-3.
- Matuszak J., Zaleski K., Skoczylas A., Ciecieląg K, Kęcik K. Influence of Semi-Random and Regular Shot Peening on Selected Surface Layer Properties of Aluminum Alloy. Materials. 2021, vol. 14, nr 24, s. 1-22. https://doi.org/10.3390/ma14247620 (MNiSW=140, IF=3.623 ).
- Kecik K., Mitura A. Modelling of an Electromechanical Coupling in Magnetic Levitation Energy Harvester, 388-389, 2021. 16th
Conference on DYNAMICAL SYSTEMS Theory and Applications DSTA 2021,
Abstracts, Editors: J. Awrejcewicz, M. Kaźmierczak, J. Mrozowski, P.
Olejnik. ISBN 978–83–66741–20–1. DOI
10.34658/9788366741201.
- Kecik K., Mitura A. Nonlinear Dynamics of a 2DOF Magneto-Mechanical Harvester, 390-391, 2021. 16th
Conference on DYNAMICAL SYSTEMS Theory and Applications DSTA 2021,
Abstracts, Editors: J. Awrejcewicz, M. Kaźmierczak, J. Mrozowski, P.
Olejnik. ISBN 978–83–66741–20–1. DOI 10.34658/9788366741201.
- Mitura A., Kecik K. Energy recovery from system with two
pseudo-levitating magnets. Abstrakty,VIII Ogólnopolska Konferencja
Naukowa. Innowacje w Praktyce., 96,2021.
- Ciecieląg K., Skoczylas A., Matuszak J., Zaleski K., Kecik K. Defect
detection and localization in polymer composites based on drilling
force signal by recurrence analysis, Measurement, 186, 2021, 110126,
https://doi.org/10.1016/j.measurement.2021.110126. (MNiSW=200, IF=3.927 ).
- Kecik K.,
Smagala A.Influence of Linear and Nonlinear Electromechanical Couplings
on Vibration Absorber–Harvester System. In: Altenbach
H., Amabili M., Mikhlin Y.V. (eds) Nonlinear Mechanics of Complex
Structures. Advanced Structured Materials, vol 157. Springer, Cham.
https://doi.org/10.1007/978-3-030-75890-5_10.
- Kecik K., Kowalczuk M. Effect of
Nonlinear Electromechanical Coupling in Magnetic Levitation Energy
Harvester. Energies 2021, 14(9), 2715. https://doi.org/10.3390/en14092715 (MNiSW=140, IF=2.702 ).
- Kecik K.,
Mitura A. How friction influences energy recovery in a magnetic
levitation harvester. Book of abstracts. Indo-Polish Conference on
Advenced in Eergy Harvesting Technology. Edited by: Pradeep V.
Malaji, Session: Energy Harvesting & Vibration Control in
Mechanical Systems, Abstract no. 8. 5, 2021.
- Mitura A., Kecik K.
Nonlinear dynamics of a magneto-mechanical system with two degrees of
freedom. Book of abstracts. Indo-Polish Conference on Advenced in Eergy
Harvesting Technology. Edited by: Pradeep V. Malaji, Session: Nonlinear
Effects in Energy Harvesting. Abstract no. 47. 23, 2021..
- Smagala, A., Kecik, K. (2021). Nonlinear dynamics analysis of a rolling
bearing. Journal Européen des Systèmes Automatisés, Vol. 54, No. 1, pp.
21-26. https://doi.org/10.18280/jesa.540103
- Kecik K.,
Mitura A. Effect of Linear and Non-linear Electromechanical Coupling in
Magnetic Levitation Energy Harvester. NONDYCON2021 Scond
International Nonlinear Dynamics Conference. Bookof Abstracts.
Edited by W. Lacarbonara, A. Arena, V. Settimi, G. Quartana, 318, 2021.
- Rusinek R., Kecik K. Effect of
linear electromechanical coupling in nonlinear implanted human middle
ear. Mechanical Systems and Signal Processing, 151 (2021) 107391,
2021. DOI: 10.1016/j.ymssp.2020.107391
(MNiSW=200, IF=6.471).
- Kecik K.
Simultaneous vibration mitigation and energy harvesting from a pendulum-type absorber. Communications in Nonlinear Science and
Numerical Simulation, 92, 2021,105479. doi.org/10.1016/j.cnsns.2020.105479.
- Kecik K. Numerical
study of a pendulum absorber/harvester system with a semi-active
suspension. ZAMM - Zeitschrift fuer Angewandte Mathematik und Mechanik ,
101(1), 1-12, 2021. doi.org/10.1002/zamm.202000045.
- Kecik K., Mitura A. Role of Electromechanical Coupling in the Vibration Absorber/Harvester System. Book of
Abstracts. International Conference on Engineering Vibration. Euler
Session, 3, 2020.
- Rusinek R., Weremczuk A., Kecik K. Nonlinear
Vibration in Bio‐Electro‐Mechanical System of Human Middle Ear. Book of
Abstracts. International Conference on Engineering Vibration.
Newton Session, 4, 2020.
- Ciecieląg K. Zaleski K., Kęcik K. Struktura geometryczna powierzchni po obróbce frezowaniem kompozytów polimerowych. Monografia. Politechnika Lubelska, Lublin 2020. ISBN: 978-83-7947-430-1.
- Kecik K.,
Ciecielag K., Zaleski K.Damage detection by recurrence and entropy
methods on the basis of time seriesmeasured during composite
milling.International Journal of Advanced Manufacturing Technology,
2021, 111, 549–563, doi.org/10.1007/s00170-020-06036-9
- Ciecielag K., Kecik K., Zaleski K.Defects detection from time series of cutting force in
composite milling process by recurrence analysis. Journal of Reinforced Plastics and Composites, 39 (23-24),890-90, 2020, doi/10.1177/0731684420935985
- Ciecielag K., Kecik K., Zaleski K. Effect of depth surface defects in carbon
fibre reinforced composite material on the selected recurrence quantifications. Advances in Materials Science, 20, 2(64), 2020. DOI: 10.2478/adms-2020-0011.
- Kecik K., Mitura A., Theoretical and
experimental investigations of a pseudo-magnetic levitation system for
energy harvesting. Sensors 2020, 20(6), 1623; doi:10.3390/s20061623.
- Kecik K., Mitura A. Energy
recovery from a pendulum tuned mass damper with two independent
harvesting sources. International Journal Mechanical and Sciences, 174. 105568, 2020, https://doi.org/10.1016/j.ijmecsci.2020.105568.
- Smagala A., Kecik K. Nonlinear
model and simulation of a rolling bearing. IOP Conference Series:
Materials Science and Engineering, 710 (2019) 012017.
doi:10.1088/1757-899X/710/1/012017.
- Rusienk R. Kecik K.,
Mitura A. Effect of electromechanical coupling in the middle ear with
implantable hearing device. Abstracts of 15tth Confference on Dynamical
Systems Theory and Applliicattiions, DSTA. Editors: J. Awrejcewicz, M.
Kaźmierczak, J. Mrozowski, P. Olejnik, 355, 2019.
- Kecik K.
Rusinek R. Improving functionality of absorber/harvester system by a
smart adaptive suspension. Abstracts of 15tth Confference on Dynamical
Systems Theory and
Applliicattiions, DSTA. Editors: J. Awrejcewicz, M. Kaźmierczak, J.
Mrozowski, P. Olejnik, 105, 2019.
- Kecik K. Theoretical
and experimental investigations of a magnetic levitation system for
energy recovery. Abstracts of 15tth Confference on Dynamical Systems
Theory and
Applliicattiions, DSTA. Editors: J. Awrejcewicz, M. Kaźmierczak, J.
Mrozowski, P. Olejnik, 104, 2019.
- Kecik K.,
Rusinek R. Improving functionality of absorber/harvester system by a
smart adaptive suspension, Theoretical Approaches in Non-Linear
Dynamical Systems. Editors: JAN AWREJCEWICZ, MAREK KAŹMIERCZAK, JERZY
MROZOWSKI, 231-240, 2019. ISBN 978-83-66287-29-7.
- Ciecielag K., Zaleski K., Kecik K. The
influence of milling parameters on the surface roughness of glass and
carbon fiber reinforced plastics. Mechanik nr 10, 649-651, 2019.
(MNiSW=40). DOI: https://doi.org/10.17814/mechanik.2019.10.84.
- Kecik K. Architecture and optimization of a low frequency maglev energy harvester, International Journal of
Structural Stability and Dynamics (IJSSD), 19(8), 2019, doi.org/10.1142/S0219455419500974.
- Kecik K., Mitura A.Energy
recovery from a pendulum vibration absorber using two harvesting
sources . Book of Abstracts,Fourth International Conference on
Recent Advances in Nonlinear Mechanics, Editors: Marian Wiercigroch,
Przemys law Perlikowski, Jerzy Wojewoda, 5-7. 2019. ISBN
978-83-7283-956-5.
- Kecik K., Smagala A.
Nieliniowy model oraz symulacja drgań łozyska tocznego. Inowacje w
praktyce. Konferencja-warsztaty-wystawa-spotkania panelowe., 110-111,
2019.
- Kecik K., Smagala A. Effect of magnet-coil architecture on energy
recovery from maglev harvester. Inowacje w praktyce.
Konferencja-warsztaty-wystawa-spotkania panelowe., 223-224, 2019.
- Rusinek R. Rekas J., Kecik K.
Vibration analysis of a shape memory oscillator by harmonic balance
method verified numerically. International Journal of Bifurcation and
Chaos, 29(3), 1930007-1-1930007-14, 2019. DOI.org/10.1142/S0218127419300076.
- Kecik K., Smagała A. Influence
of electromechanical coupling on foldover effect of maglev harvester.
Materiał konferencyjne XIII Konferencji Nowe Kierunki Rozwoju
Mechaniki, Poznań-Będlewo, 27-28, 2019.
- Kecik K.,
Pawlak P. Effect of Magnet-Coil Configuration on Energy Recovery from
an Electromagnetic Harvester. Machine Dynamics Research, 42(2), 35-43,
2018.
- Mitura A., Kecik K.,
Augustyniak M., Dynamics and Energy Harvesting Control of an
Autoparametric Pendulum-Like System. Electrical Review, 2018 97),
82-85, 2018, (MNiSW=14), LINK, doi:10.15199/48.2018.07.20.
- Kecik K., Zaszczynska A.,
Mitura A. Experimental investigations of energy recovery from an
electromagnetic pendulumvibration absorber. Journal of Vibration
Testing and System Dynamics, 2(3), 209-2019, 2018, DOI:10.5890/JVTSD.2018.09.002.
- Kecik
K.,
Energy recovery from a nonlinear electromagnetic system. Acta
Mechanica et Automatica, 12(1), 11-18, 2018, DOI 10.2478/ama-2018-0002, ( MNiSW=14), LINK.
- Kecik
K., Assessment of energy harvesting and vibration mitigation
of a pendulum dynamic absorber. Mechanical Systems and Signal
Processing, 106, 198-209, 2018,( MNiSW=45, IF=4.116), doi.org/10.1016/j.ymssp.2017.12.028, LINK.
- Kecik
K., Mitura A., Warminski J., Lenci S. Foldover Effect and
Energy Output
from a Nonlinear Pseudo-Maglev Harvester. AIP Conference Proceedings, 1922, 100009, (2018), https://doi.org/10.1063/1.5019094.
- Rusinek R., Kecik K., Szymanski M., Rekas J.. An influence of
temperature on reconstructed middle ear with shape memory prosthesis.
Meccanica, 53(8), 1959-1980, 10.1007/s11012-017-0798-7. LINK.i
- Kecik K., Rusinek
R.Dynamics and modelling of a middle ear with SMA prothesis,14th
Conference on Dynamical Systems Theory and Applications DSTA,
Abstract. 2017, p. 251
- Rusinek R., Kecik K.
Nonlinear aspects of the human middle ear. 14th Conference on Dynamical
Systems Theory and Applications DSTA, Abstract. 2017, p. 347.
- Ciecielag K., Kecik
K.,
Zaleski K ., Influence of damage size on its detection of
composite milling process by recurrence plot
technique.
Composites theory and practice, 17(4), 194-199, 2017, (MNiSW=11), LINK.
- Mitura
A., Kecik K.
Odzyskiwanie energii i dynamika wahadłowego
eliminatora drgań z półaktywnym zawieszeniem. Modelowanie
inżynierskie, 64, 61-67, 2017, LINK.
- Kecik
K., Mitura A., Lenci S., Warminski J. Multiple solutions
and
corresponding energy output from a nonlinear maglev harvester.
Conference Proceedings of22nd International Conference on Computer
Methods in Mechanics, Editors: T. Burczynski, M. Kuczma, J. Warminski,
J. Podgorski, E. Blazik-Borowa, T. Lipecki, MS09-29 - MS09-30, 2017.
- Kecik K.,
Mitura A., Brzeski P.,
Perlikowski P., Energy recovery froma a pendulum vibration absorber
wita a maglev harvester. 9th European Nonlinear Dynamics Conference
(ENOC 2017) Papers, ISBN 978-963-12-9168-1. ID211, (http://congressline.hu/enoc2017/abstracts.php).
- Mitura A., Kecik
K., Augustyniak
M. Dynamics and energy harvesting control of an autoparametric
pendulum-like system. Book of abstracts: 10th International Conference
New Electrical and Electronic Technologies and Their Industrial
Implementation (NEET 2017), 49, 2017. ISSN 978-83-7947-259-8.
- Kecik
K., Energy recovery from a nonlinear maglev harvester.
Conference
Proceedidngs of 9th International Symposium on Mechanics of Materials
and Structures & 2nd International Conference on Advances in
Micromechanics of Materials (Abstract) 46-52, 76-77, 2017.
- Kecik K.,
Energy recovery from a nonlinear maglev harvester.
Conference Proceedidngs of 9th International Symposium on
Mechanics of
Materials and Structures & 2nd International Conference on
Advances
in Micromechanics of Materials, 76-77, 2017.
- Mitura., Kecik
K. Odzyskiwanie
energii i dynamika wahadłowego eliminatora drgań z
półaktywnym
zawieszeniem. 56 Sympozjon ''Modelowanie w Mechnice",
25.02.2017-01.03.2017, Ustroń, 2017. Zeszyt streszczeń, 115, 2017.
- Kecik K.,
Mitur A., Lenci S., Warminski J.
Energy harvesting from a magnetic levitation system. International
Journal of Non-Linear Mechanics , 94, 200-206, 2017, LINK.
- Rusinek R,, Warminski J., Szymanski M., Kecik K.,
Kozik K. Dynamics of the middle ear ossicles with an SMA prosthesis.
International Journal of Mechanical Sciences (IJMS), 127, 163-175,
2017, doi,
10.1016/j.ijmecsci.2016.10.004, (WoS, Scopus, MNISW=40, IF=2.481), LINK.
- Kecik K.,
Brzeski P.,
Perlikowski P. Non-linear dynamics and optimization of a harvester
absorber system. International Journal of Structural
Stability
and Dynamics (IJSSD), 17(5), 1-15, 2017, (WoS, Scopus, MNISW=25,
IF=0.764), LINK.
- Kecik K.,
Ciecieleg K., Zaleski K. Damage detection of composite milling process
by recurrence plots and quantyfications analysis. The International Journal of
Advanced Manufacturing Technology (IJAMT), 89(1-4),
133-144,
2017. DOI: 10.1007/s00170-016-9048-8, (WoS, Scopus, MNISW=25,
IF=1.458), LINK.
- Kecik K.
Materiały XII
Konferencji ''Nowe Kierunki Rozwoju Mechaniki - NKRM''.
Suprasl, 2017.
Simultaneous Energy Recovery and Vibration Control of a Pendulum
Absorber with a Maglev Harvester, 39-40.
- Kecik K.
Enhanced energy
recovery of a vibration absorber using dual harvester systems. Machine
Dynamics Research, 40(2), 79-88, 2016.
- Kecik K.,
Mitura A.,
Warminski J. Lenci S. Book of papers 24th International Congress of
Theroretical and Applied Mechanics, ICTAM, 2016, Montreal , Kanada.
Nonlinear dynamics of a pendulum vibration absorber with a maglev
harvester,186-187, 2016, ISBN: NR16-127/2016E-EPUB.
- Rusinek R., Warminski J., Szymanski M., Weremczuk A., Kecik K.
An influence of temperature on dynamics of smart middle ear prosthesis.
Proceedings of theEuropean Congress on Computational Methods in Applied
Sciences and Engineering (ECCOMAS) Congres 2016.
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system.
Experimental Study. Springer Proceedings in Mathematics &
Statistics, Dynamical Systems: Modelling, Vol. 181, 1st ed. 197-208,
2016, XVI, ISBN 978-3-319-42402-6, (WoS, Scopus, MNISW=15).
- Kecik K.,
Borowiec M.,
Rusinek R. Verification of the stability lobes of Inconel 718 milling
by recurrence plot applications and composite multiscale entropy
analysis. European Physics Journal Plus, 131(14), 2016. DOI
10.1140/epjp/i2016-16014-x., (WoS, Scopus, MNISW=25).
- Mitura A. Kecik
K.
Influences of system parameters on energy harvesting from
autoparametric absorber. Numerical research. Vibration in Physical
Systems. XXVII, 281-286, 2016, (Scopus, MNISW=5).
- Mitura A. Kecik
K. Influences
of system parameters on energy harvesting from autoparametric absorber.
Experimental
research. Vibration in Physical Systems. XXVII,
287-292, 2016, (Scopus, MNISW=5).
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system. Dynamical
Systems Control and Stability. Editors: J. Awrejcewicz, M. Kaźmierczak,
J. Mrozowski, P. Olejnik, 297-306, 2015.
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system.
Experimental Study. Proceedings of 13th Conference on Dynamical Systems
Theory and Applications DSTA 2015, p 163, 2015. ISBN 978-83-7283-705-9.
- Kecik K.,
Mitura A.
Non-linear dynamics of a vibration harvest-absorber system.
Proceedinds of 13th Conference on Dynamical Systems Theory and
Applications DSTA 2015, p 162, 2015. ISBN 978-83-7283-705-9.
- Kecik K.
Application of
shape memory alloy in harvesto-absorber system. Acta Mechanica et
Automatica, 9(3), 155-160, 2015, (Scopus, MNISW=14).
- Kecik K.,
Mitura A.
Influence of active elements on the pendulum’s rotational
motion
for energy harvesting. Proceedings of the 3rd Polish Congres of
Mechanics21st International Conference and Computer Methods in
Mechanics, vol 2, 789-790, ISBN 978-83-932107-4-9, 2015.
- Kecik K.,
Brzeski P., Perlikowski P. Nonlinear dynamics and bifurcation of a vibration
absorber-harvester system. Proceedings of the ECCOMAS Thematic
Conference on Multibody Dynamics 2015, 806-816, 2015, (Scopus, WoS,
MNISW=15).
- Mitura A., Kecik
K,
Warminski J, Jarzyna W, Lenci S. A numerical study of an autoparametric
system with electromagnetic energy harvester. Proceedings of the
ECCOMAS Thematic Conference on Multibody Dynamics 2015, 609-615, 2015,
(Scopus, WoS, MNISW=15).
- Rusinek R., Lajmert P., Kecik
K.,
Kruszynski B, Warminski J. Chatter identification methods on the basis
of time series measured during titanium superalloy milling.
International Journal of Mechanical Sciences, 99, 196–207,
2015.
- Kecik K. Application
of
shape memory alloy in harvesto-absorber system. Proceedings of VIII-th
International Symposium on Mechanics of Materials and Structures and
Fracture and Fragmentation in Science and Engineering Conference,
119-124, 2015.
- Kecik K.,
Ciecielag K.,
Zaleski K.: Damage detection of composite milling process using
recurrence plots technique. Conference Proceedings ofVIII-th
International Symposium on Mechanics of Materials and Structures and
Fracture and Fragmentation in Science and Engineering Conference,
111-117, 2015.
- Kecik K.
Dynamics and control of an autoparametric system. International Journal
of Non-linear Mechanics, 70, 63-72, 2015. c
- Kecik K.,
Mitura A.
Nonlinear Dynamics and Control of an Active Suspension of a Pendulum
Vibration Absorber. Machine Dynamics Research, 38(1)1, 47 - 53, 2014,
(MNiSW=6).
- Kecik
K. Energy
harvesting of an autoparametric system. Proceedings of the 16-th
Conference on Mechatronics - Mechatronika 2014, p. 203-208
(Scopus, WoS, MNISW=10).
- Kecik K.
Control of
chaotic dynamics by magnetorheological damping of a pendulum vibration
absorber. Structural Engineering and Mechanics, 51(5), 743-754, 2014.
- Sado D., Pietrzakowski M.. Kecik K.
Vibration control of autoparametric system using SMA spring and MR
dampers in the pendulum joints. Proceedings of the ASME International
Design Engineering Technical Conference &Computers and
Information
in Engineering Conference IDETC/CIE 2014, p.1-7, DETC2014-34090
(Scopus, WoS, MNISW=10).
- Kecik K.,
Kapitaniak M.
Parametric Analysis of Magnetorheologically Damped Pendulum Vibration
Absorber. International Journal of Structural Stability and Dynamics,
14(8), 1440015 (13 pages), 2014.
- Mitura A. Kecik
K.
Augustyniak M. Application of magnetorheological dampers to control of
a mechanical system with a pendulum. Proceedings of 8th European
Nonlinear Dynamics Conference (ENOC 2014), p. 306, 2014.
- Kecik K.
An active suspension of a pendulum vibration absorber. Modelowanie
Inżynierskie, 19(50), 83-88, 2014.
- Rusinek R., Weremczuk A., Kecik K., Warminski
J. Dynamics of a time delayed Duffing oscillator. International Journal
of Non-Linear Mechanics, 65, 98-106, 2014.
- Kecik K.,
Mitura A.,
Warminski J. Wpływ parametrów układu na zjawisko dynamicznej
eliminacji drgań w nieliniowym układzie mechanicznym z wahadłem.
Zeszyty streszczeń, p. 79-80, 2014.
- Mitura A., Kecik
K.,
Warminski J. Badania eksperymentalne układu z wahadłem sterowanego za
pomocą tłumika MR oraz sprężyny SMA. Zeszyty streszczeń, p. 107, 2014.
- Kecik K.,
Mitura A., Sado
D., J. Warminski. Magnetorheological damping and semi-active control of
an autoparametric vibration absorber. Meccanica, 49(8), 1887-1900, 2014.
- Litak G., Rusinek R., Kecik
K.,
Rysak A., Syta A. Dynamics of composite milling: Application of
recurrence plots to Huang experimental modes.Discontinuity and
Complexity in Nonlinear Physical Systems Nonlinear Systems and
Complexity, 6, 359-367, 2014, Machado, J. A. Tenreiro, Baleanu,
Dumitru, Luo, Albert C. J. (Eds.), Springer (chapter in book), ISBN
978-3-319-01411-1, (MNISW=5).
- Kecik K.
Bifurcations and
control of an autoparametric vibration absorber. Dynamical Systems-
Applications. Editors: J.Awrejcewicz, M. Kazimierczak, P. Olejnik and J.
Mrozowski, 59-68, 2013.
- Kecik K.,
Borowiec M. An autoparametric energy harvester. Th Europen Physical
Journal Special Topics 222(7), 1597–1605 (2013).
- Rusinek R., Weremczuk A., Kecik K.
How friction influences regenerative chatter. Proceedings off ICOVP
2013, 11th International Conference on Vibration Problems, p.125.
- Rusinek R,
Kecik K.,
Warminski J. Bifurcations in frictional model of cutting process.
Proceedings of Nonlinear Dynamics in Enginneering: Modelling, Analysis
and Applications p. 78, 2013.
- Kecik K. Rusinek
R.,
Warminski J., Wiercigroch M. Dynamics of an active autoparametric
system. Proceedings of Nonlinear Dynamics in Enginneering: Modelling,
Analysis and Applications p. 35.
- Kecik K.,
Mitura M.,
Warminski J. Non-linear Dynamics and Magnetorheological Control of a
Pendulum System. Proceeddings of the Euromech Colloguium n.541. p.44.
ISBN-13 978-888-7965728.2006
(4)
- Rusinek R., Kecik
K.,
Weremczuk A.,Warminski J. Dynamics of Ueda's oscillator with time
delay. Proceeddings of the Euromech Colloguium n.541. p.44. ISBN-13
978-888-7965728.
- Kecik K.
Energy harvesting of a pendulum vibration absorber. Przeglad
Elektrotechniczny (Electrical Review), 2013(7), 169-172, 2013.
- Kecik K.,
Mitura A.,
Warmiński J. Efficiency analysis of an autoparametric pendulum
vibration absorber. Eksploatacja i Niezawodnosc-Maintenance and
Reliability, 15(3), 221–224, 2013.
- Weremczuk A., Kecik
K.,
Rusinek R. Warmiński J. The dynamics of the cutting process with
duffing nonlinearity. Eksploatacja i Niezawodnosc-Maintenance and
Reliability, 15(3), 209–213,commercialization 2013.
- Rusinek R., Kecik
K.,
Warminski J. A problem of stability of milling of materials used in
avianton industry. IUTAM Symposium on Nonlinear Dynamics for Advanced
Technologies and Engineering Design. IUTAM Bookseries. Editors: Marian
Wiercigroch, Giuseppe Rega, ISBN 978-94-007-5742-4. Volume 32,
235-247,2013.
- Litak G., Kecik
K.,RusineSmart
Material Systems and Structures - Modeling and Simulationk R. Cutting
force response in milling of Inconel: Analysis by
wavelet and Hilbert-Huang Transforms. Latin American Journal of Solids
and Structures, 10(1), 133-140, 2013.
- Kecik K.,
Rusinek R.,
Warminski J. Modeling of high-speed milling process with frictional
effect. Proceedings of the Institution of Mechanical Engineers, Part K:
Journal of Multi-body Dynamics, 227(1), 3-11, 2013.
- Kecik K.,
Mitura A.
Magnetorheological Damping of a System with a Pendulum Vibration
Absorber. Machine Dynamics Research. Vol. 36, No 2, 50–57,
2012.
- Rusinek R., Kecik
K.,
Warminski J., A. Weremczuk. Dynamic model of cutting process with
modulated(WoS, IF=1.568) spindle speed. AIP Conf. Proc. no. 1493,
805-809, 2012.
- Rusinek R., Kecik
K.,
Borowiec M., Weremczuk A. Warminski J. Dynamics of machining of
composite materials for aviation industry. Nonlinear Dynamics Phenomena
in Mechanical, Aerospace and Civil Engineering. Booklet of Abstract,
47-48, 2012.
- Kecik K.,
Warminski J.
Magnetorheological damping of an Autoparametric System with a Pendulum.
Nonlinear Dynamics Phenomena in Mechanical, Aerospace and Civil
Engineering. Booklet of Abstract, 20-21, 2012.
- Kecik K.,
Rusinek R.,
Warminski J., Weremczuk A. Chatter control in the milling process of
composite materials. Journal of Physics: Conference Series, 382(1)
012012, 2012, 1-6, IOP Publishing.
- Warminski J., Kecik
K.,
Mitura A., Bochenski M. Nonlinear phenomena in mechanical system
dynamics. Journal of Physics: Conference Series, 382(1) 012004, 1-6,
2012.
- Kecik K.,
Warminski J. Chaos in mechanical pendulum-like system near main
parameric resonanse. Procedia IUTAM, 5, 249-258, 2012.
- Kecik K.
Influence of
nonlinear damping on dynamics of mechanical system with a pendulum.
Vibrations in Physical Systems, XXV, 223-228, 2012
- Kęcik K.
Zastosowanie
tłumika magnetoreologicznego do sterowania drganiami w układzie
mechanicznym z wahadłem. Przegląd Elektrotechniczny (Electrical
Review), 2012(2),
223-226, 2012.
- Warminski J., Kecik
K.
Autoparametric vibrations of an nonlinear system with a pendulum and
magnetorheological damping. Nonlinear Dynamics Phenomena in Mechanics.
Eds. J. Warminski, S. Lenci, M. P. Cartmell, G. Rega and M.
Wiercigroch, 181, 1-62, 2012, ISBN 978-94-007-2473-0, Springer (chapter
of book).
- Kecik K.,
Warminski J.,
Rusinek R. Regenerative and frictional chatter of high speed milling
process. Modelling and experiment. Dynamical Systems. Nonlinear
Dynamics and Control, Editors by J. Awrejcewicz, M. Kazimierczak, P.
Olejnik, J. Mrozowski, 305-310, 2011.
- Kecik K.,
Warminski J.,
Rusinek R. Chaos in mechanical systems. Selected Problems. Proceedings
of IUTAM Symposium of 50 Years of Chaos: Applied and Theoretical,
126-127, 2011.
- Kecik K.,
Rusinek R.,
Warminski J. Dynamical analysis of milling process with various radial
depth of cut. Zeszyty Naukowe Politechniki Poznańskiej. Budowa Maszyn i
Zarządzanie Produkcją, 2(16), 69-81, 2011.
- Rusinek R., Kecik
K., Warminski J. Dynamics of composite materials cutting.
Advanced in Manufacturing Science and Technology, 35(3), 31-37, 2011.
- Kecik K.,
Rusinek R.,
Warminski J. Stability lobes analysis of nickel superalloys milling.
International Journal Bifurcation and Chaos, 21(10), 1-12, 2011.
- Rusinek R., Warminski J.,
Kecik K. Regenerative and frictional chatter. Proceedings
of 7 th European Nonlinear Conference, Roma, 84, 2012006
(4)1.
- Kecik K.,
Warminski J.
Dynamics of an autoparametric pendulum-like system with a nonlinear
semiactive suspension. Mathematical Problems in Engineering, vol 2011,
Article ID 451047, Hindawi Publishing Corporation New York,
2011.
- Rusinek R., Warminski J., Kecik K.
Regenerative chatter in composites milling.172-177, 2010. Proceedings
of the eight international conference on high speed machining. ISBN
978-2-9534170-2-9.
- Kecik K.,
Rusinek R.,
Warminski J. Verification of stability lobes of nickel superalloys
milling. Proceedings of the eight international conference on high
speed machining. ISBN 978-2-9534170-2-9, 319-324, 2010.
- Kecik K.,
Warminski J.,
Rusinek R. Vibration analysis during cutting of process aviation
materials. Proceedings of Manufacturing Conference, 98, 2010.
- Rusinek R., Kecik
K., Warminski J. Dynamics of composite material cutting.
Proceedings of ManufactuKecik
K. Enhanced energy
recovery of a vibration absorber using dual harvester systems. Machine
Dynamics Research, 40(2), 79-88, 2017.ring Conference, 176, 2010.
- Rusinek R. Kecik
K.,
Warminski J. Analiza stabilności procesu frezowania stopu
tytanu.
Obróbka skrawaniem- Współczesne Problemy. Szkoła
Obróbki Skrawaniem, (chapter of book), Łódź,
253-260,
2010.
- Rusinek R., Warminski J., Kecik K.
Dynamics of cutting process of material used in aviation industry.
Proceedings of IUTAM Symposium on Nonlinear Dynamics for
Advanced
Technologies and Engineering Designed (NDATED), Aberdeen, Scotland,
111-112, 2010.
- Kecik K.,
Warminski J.
Analysis of chaotic and regular motions of an autoparametric system by
recurrence plots applications. Vibrations in Physical Systems, XXIV,
221-226, 2010.
- Kecik K.,
Rusinek R.,
Warminski J. Nonlinear dynamics of superalloys cutting. 10th Dynamical
Systems Theory and Applications. DSTA-2009. Editors by J. Awrejcewicz,
M. Kazimierczak, P. Olejnik, J. Mrozowski, volume 2, 607-612, 2009.
- Warminski J., Kecik
K.
Instabilities in the main parametric resonance area of mechanical
system with a pendulum. Journal of Sound Vibration, 332,
612-628, 2009.
- Warmiński J., Kęcik
K.
Regular and chaotic motions of an autoparametric real pendulum system
with the use of a MR damper. Modeling, Simulation and Control of
Nonlinear Engineering Dynamical Systems. ISBN 978-1-4020-8778-3,
Springer, 267-276, 2009 (chapter of book).
- Kecik K., Warminski
J.
Magnetorheological damping of an autoparametrically excited system.
Conference Proceedings, Euromech Colloquium 498,Lublin, 186-192, 2008.
- Warminski J., Kecik
K.
Chaos control by application of magnetorheological damping. Proceedings
of XXII International Congres of Theoretical and Applied Mechanics
(ICTAM), 25-29 August, Adelaide, Australia, 2008.
- Kecik K.,
Warminski J.
Control of regular and chaotic motions in autoparametrically system
with pendulum by using MR damper. Dynamical Systems Theory and
Applications, Łódź, December 17-20. Editors by J.
Awrejcewicz,
P. Olejnik, J. Mrozowski, (WoS, IF=1.568)e 2, 649-656, 2007.
- Kecik K.,
Warminski J.,
Szabelski K. Instability area in the main parametric resonance of
mechanical system with pendulum. Proceedings of The Second
International Conference. Nonlinear Dynamics, 25-28 September, Ukraine,
Kharkov, 114-119, 2007.
- Kecik K,.
Warminski J.,
Szabelski K. Drgania regularne i chaotyczne układu
mechanicznego
z wahadłem. Materiały konferencyjne CD Rom, I Kongresu Mechaniki
Polskiej, I Kongres Mechaniki Polskiej, Warszawa, 28-31 sierpnia
2007.
- Kecik K., Warminski J. Experimental investigations of
autoparametric vibrations of a nonlinear system with pendulum. Przegląd
Mechaniczny, 12, 86-89, 2006.
- Warminski J., Kecik K., Mitura A. Influence of nonlinear
suspension on vibrations of autoparametric system with pendulum.
Proceedings of 16 th International Workshop on Computational Mechanics
of Materials,
53-54, 2006.
- Lonkwic P., Kecik
K., Lusiak T. The Proper elevator car vibration during a
travel.China Elevator, 7, 28-32, 2006.
- Warminski J., Kecik
K.
Autoparametric vibrations of a nonlinear system with pendulum.
Mathematical Problems in Engineering, vol. 2006, Article ID 80705,
1-19, Hindawi Publishing Corporation New York, 2006.
- Lonkwic P., Kecik
K., Lusiak T. Drgania kabiny dźwigu podczas
jazdy. Dozór Techniczny, 5, 115 - 117, 2005.
- Kecik K.,
Warminski J.
Autoparametric vibration of a nonlinear system with pendulum.
Proceedings of The International Conference "Nonlinear Dynamics",
Kharkov, Ukraine, 87-91, 2004.